Instuctions
http://www.EZPermanentMakeupllc.com
Eyelash and Brow Tinting Instructions
Preparations:
Remove all makeup from eyelashes and lid with oil-free remover. Clean area with warm water or witch hazel for best results, allow 10 minutes for eye area to completely dry before beginning the perming procedure. Remove contact lenses, if any. If client is planning a lash perm, the tint procedure must always follow the perming procedure. Because the perms softens lash cuticle, tints take better and last longer. Tell client to keep their eyes closed during the whole tinting process.
Procedure:
1. Squeeze ¼ inch of lash tint into pigment cap (provided in kit) or small glass or plastic dish. Mix 3 drops of Oxidant, stir until creating a smooth paste. (note: all colors of tint will look brown when first squeezed out of the tube, until it has had time to oxidize.) The end mixture should be the consistency of pudding, if it is tacky like peanut butter add a little more oxidant (white lotion).
2. Apply a small amount of Vaseline around the eyebrows (for eyebrow tinting) and/ or on the upper and lower eyelids for lash tinting using a Q-tip. Be careful not to get it on the lashes this will prevent tint to penetrate through the Vaseline. Have client look up towards the sky so it is easier for you to apply Vaseline to the skin under the bottom lashes.
3. Place (half circle shaped) moist cotton cosmetic pad under the lower lashes. (Separate the cotton pads in half, creating 2-thin layer. This fits nicely under the lower lash).
4. Cover eyelashes and or eyebrows with tint paste using wooden applicator sticks, without touching the skin around. Wipe off any tint touching the skin with a moist Q-tip.
5. Cover the eyes with warm moist eye pads.
6. Eyebrow process time: 1 to 2 minutes then check your color, can always re apply. Care must be taken not to leave the paste on eyebrows for too long, since too dark of eyebrows tend to give the face a hard expression.
7. Eyelash process time: 5 to 15 minutes. Longer process time gives deeper color.
8.Remove eye pads and wipe clean with a warm moist cotton pad. Wiping from the root area down to the tips and onto the lash shield. Eyes must remain closed until the last trace of paste has been removed from the eyelashes. Wipe brows until moist pad shows no sign of tint residue.
9. Finish cleaning the lashes or brows with witch hazel removing all residual chemicals.
10. Before having client open their eyes, rinse lash area with saline.
11. After client’s eyes are opened flood eyes with saline to make sure no residual products are left in the eyes.
Time needed for complete tinting service is (time may vary)
Eyelash 20 – 25 minutes. (The longer tint stays on the lashes the more intense the color will become)
Eyebrows 10 – 15 minutes ( Intensity of color is regulated by amount of time spent on the hair)
Some clients may be allergic to tints, ask your client. If the client doesn’t know, perform a patch test.
Patch test:
1.Clean inner area of forearm with alcohol.
2.Apply small amount of tint solution to the cleaned area. Allow solution to dry. Wipe off. If any redness or irritation occurs, DO NOT CONTINUE WITH THE PROCEDURE.
Our eyelash tint is a non-toxic dye produced from plant and vegetable extracts. Each tube of dye is 20 grams in size, which equates to 60 effective applications.
Colors choices are: Black, Blue/Black and Brown.
This eyelash tint is extremely successful and currently is used in over 20 countries.
Tinting is a great addition to eyelash perms. Perm kits starting at $29.99
www.EyelashPerm.com and www.LashPerm.com since 1995
www.EZPermanentMakeup.com since 1995
1.509.990.0925 / 1.509.995.5439 / 1.208.664.4948
You have questions we have answers
Tell a friend!
Eyelash and Brow Tinting Instructions
Preparations:
Remove all makeup from eyelashes and lid with oil-free remover. Clean area with warm water or witch hazel for best results, allow 10 minutes for eye area to completely dry before beginning the perming procedure. Remove contact lenses, if any. If client is planning a lash perm, the tint procedure must always follow the perming procedure. Because the perms softens lash cuticle, tints take better and last longer. Tell client to keep their eyes closed during the whole tinting process.
Procedure:
1. Squeeze ¼ inch of lash tint into pigment cap (provided in kit) or small glass or plastic dish. Mix 3 drops of Oxidant, stir until creating a smooth paste. (note: all colors of tint will look brown when first squeezed out of the tube, until it has had time to oxidize.) The end mixture should be the consistency of pudding, if it is tacky like peanut butter add a little more oxidant (white lotion).
2. Apply a small amount of Vaseline around the eyebrows (for eyebrow tinting) and/ or on the upper and lower eyelids for lash tinting using a Q-tip. Be careful not to get it on the lashes this will prevent tint to penetrate through the Vaseline. Have client look up towards the sky so it is easier for you to apply Vaseline to the skin under the bottom lashes.
3. Place (half circle shaped) moist cotton cosmetic pad under the lower lashes. (Separate the cotton pads in half, creating 2-thin layer. This fits nicely under the lower lash).
4. Cover eyelashes and or eyebrows with tint paste using wooden applicator sticks, without touching the skin around. Wipe off any tint touching the skin with a moist Q-tip.
5. Cover the eyes with warm moist eye pads.
6. Eyebrow process time: 1 to 2 minutes then check your color, can always re apply. Care must be taken not to leave the paste on eyebrows for too long, since too dark of eyebrows tend to give the face a hard expression.
7. Eyelash process time: 5 to 15 minutes. Longer process time gives deeper color.
8.Remove eye pads and wipe clean with a warm moist cotton pad. Wiping from the root area down to the tips and onto the lash shield. Eyes must remain closed until the last trace of paste has been removed from the eyelashes. Wipe brows until moist pad shows no sign of tint residue.
9. Finish cleaning the lashes or brows with witch hazel removing all residual chemicals.
10. Before having client open their eyes, rinse lash area with saline.
11. After client’s eyes are opened flood eyes with saline to make sure no residual products are left in the eyes.
Time needed for complete tinting service is (time may vary)
Eyelash 20 – 25 minutes. (The longer tint stays on the lashes the more intense the color will become)
Eyebrows 10 – 15 minutes ( Intensity of color is regulated by amount of time spent on the hair)
Some clients may be allergic to tints, ask your client. If the client doesn’t know, perform a patch test.
Patch test:
1.Clean inner area of forearm with alcohol.
2.Apply small amount of tint solution to the cleaned area. Allow solution to dry. Wipe off. If any redness or irritation occurs, DO NOT CONTINUE WITH THE PROCEDURE.
Our eyelash tint is a non-toxic dye produced from plant and vegetable extracts. Each tube of dye is 20 grams in size, which equates to 60 effective applications.
Colors choices are: Black, Blue/Black and Brown.
This eyelash tint is extremely successful and currently is used in over 20 countries.
Tinting is a great addition to eyelash perms. Perm kits starting at $29.99
www.EyelashPerm.com and www.LashPerm.com since 1995
www.EZPermanentMakeup.com since 1995
1.509.990.0925 / 1.509.995.5439 / 1.208.664.4948
You have questions we have answers
Tell a friend!
